develop your own presentation style...
...but try to avoid commonly made mistakes
How often have you been listening to oral presentations that dealt with interesting science while you nevertheless had difficulty to pay attention till the end? How often did you lose your interest before the speaker had even come halfway? Was it because of the subject of the talk or was it the way the speaker presented it?
Many presentations concern interesting work, but are nevertheless difficult to follow because the speaker unknowingly makes a number of presentation errors. By far the largest mistake is that a speaker does not realize how an audience listens. If you are well aware of what errors you should avoid, the chances are high that you will be able to greatly improve the effectiveness of your presentations.The Attention Curve
The average attendee of a conference is by all means willing to listen to you, but he is also easily distracted. You should realize that only a minor part of the people have come specifically to listen to your talk. The rest is there for a variety of reasons, to wait for the next speaker, or to get a general impression of the field, or whatever.
Figure 1 illustrates how the average audience pays attention during a typical presentation of, lets say, 30 minutes. Almost everyone listens in the beginning, but halfway the attention may well have dropped to around 10-20% of what it was at the start. At the end, many people start to listen again, particularly if you announce your conclusions, because they hope to take something away from the presentation.
What can you do to catch the audiences attention for the whole duration of your talk? The attention curve immediately gives a few recipes:
There are many reasons why this may happen, some may be outside your control, such as inadequate sound systems, poor overhead projectors, or noisy conference centers with cardboard walls between two sessions running in parallel. What you can do, is avoid anything that may encourage the audience to stop listening. Such mistakes fall in two classes: speakers errors and presentation errors. We list a couple of the most common ones, most are self explanatory.
In such cases the audience will definitely experience information overload. Of course we sympathize with the speaker who feels insufficiently confident in English. However, reading a text is almost always an unsatisfactory solution. And after all, nobody in the audience will blame you for a couple of mistakes in the language, English will be a foreign language for the majority of the participants.
You should be aware of fundamental differences between an oral presentation and a written report. In the presentation the listener by necessity has to follow the order in which the speaker presents his material. The reader of an article can skip parts, go back to the materials section, take a preview at the conclusions when he reads the results, etc. Exactly because of this reason, all scientific reports follow the generally adopted structure of Abstract Introduction Experimental Methods Results Discussion Conclusions References. However, this structure is totally UNSUITABLE for an oral presentation. Nevertheless, the majority of contributed talks at a conference adheres to it. Why is this generally accepted structure unsuitable for lectures? Because the listener will have to remember details about the experimental methods until the results are presented, and he must recall the various results when the speaker deals with the discussion. In other words, details that should be combined (the why, how, what and what does it mean of a particular experiment) are treated separately. You ask a lot from the audience if they need to remember all these facts and figures until at the end you explain how these bits and pieces fit in a larger picture.
Grouping together what belongs together is a much better way to organize your talk. Hence, if you discuss characterization by e.g. XPS, you start this part of the presentation with a few introductory remarks of what you want to learn about your catalyst, how XPS may help you to provide this information, then you show a few results and you discuss what they mean. End with a conclusion. Then you go to the next item in your presentation, which may be determination of particle size by TEM. When finished with this, you may give an overall conclusion on the state of your catalyst before you go on to speak about catalytic behavior.
You should realize that the two key issues in the preparation of a talk are:
Once you submitted the abstract to the conference organizers, it is time to start thinking about how you organize the material in a talk if your abstract will have been accepted. Read about the background of your work, read related work, look at your own results regularly and think about the most relevant conclusions. Try to imagine what type of audience you would have and consider what you would have to include as background information
Try to capture the message of your presentation in a single sentence. This is difficult. You will only be able to do this if you really master your subject (which is actually the main requirement for being able to clearly present your work to others).
Use the sentence under 2) as the criterion to select which results to include, in what order, what basic information is needed to appreciate these results, and which experimental details are necessary and which not. Be very critical, any experiment or result that does not contribute to your main message should be left out.
Although it may at first sight seem natural to present your results in
the chronological order in which you obtained them, this does not have to be the most
ideal order for the audience to understand what you have done. Think about where to
discuss highlights, at the beginning? Near the end? Maybe dispersing the remarkable
features through the entire talk? It is up to you, but take the order which you feel
appeals most to the audience.
The scientific background of your audience determines how much you should explain about experimental approaches, characterization techniques. Be careful NOT to identify your audience with your supervisor, the majority of listeners is unlikely to possess much specific knowledge about your subject. By the way, hardly anyone minds to hear something he already knows, as long as you explain it well, and possibly in an entertaining way.
However, before you give your opening sentence, it is good to start with "Mister Chairman, Ladies and Gentlemen " followed by a few seconds of silence, in which you look around to see if people are paying attention. By doing so, you actually force the audience to listen. With these words you also test the sound system, and you ascertain that your important opening lines are going to be heard.
In the rest of the Introduction, you sketch the background of your research. Remember that many people will be very interested in a concise summary of the status in your area. Hence, reserve sufficient time (i.e. at least 30% of the total time) for the general aspects of your work. It is good practice to not only clearly identify the scientific question you address, but also give the conclusion of your work, if you wish so. In this way you enable the audience to better follow your reasoning and to anticipate on the outcome of the experiments. In other words, you give them a chance to listen actively. Remember that a scientific presentation is not a detective story which is solved in the last moment.
Figure 4. Spreadsheets often produce unsatisfactory figures, particularly with respect to labeling. A good figure has labels on the curves and not in a legend. Secret codes and jargon should be avoided as much as possible
Hence, when showing a series of spectra or activity curves, you put an understandable label on each curve (not a,b,c, which are explained in a separate legend!!). Avoid reference to samples in codes such as "Sample AX234/a5" which may be handy in laboratory notebooks, but are unsuitable in presentations (and in articles as well).
Using tables with numbers is in most cases not recommended. Remember that an audience reads everything you show on a transparency, and while they read they pay less attention to what you say. Also avoid theoretical formulas and mathematical derivations. Sometimes you may have to show one, but try to keep it to a minimum. You should realize that the human memory remembers in terms of pictorial information. Hence clear figures, schemes, and diagrams are the best means to convey information.
Using transparencies on a simple overhead projector is more or less problem free. In most cases, transparencies project well, are easy to read for the audience, and the lecture hall does not have to be darkened so that people can make notes if they wish. For you as a speaker, transparencies leave you the flexibility to make last minute changes, or even write on them during projection.
Slides do not give this kind of flexibility. Optimally prepared slides in combination with a high quality projector can certainly provide beautiful visual support to your talk. Unfortunately, many slide projectors offer less than optimum quality, and moreover, many speakers show unsatisfactory slides. In addition, many things may go wrong: slide carrousels may get stuck, slides may go upside down, the slide control does not work properly, etc. Another serious drawback of using slides is that the lecture theater has to be dark, making it difficult for the audience to take notes. If the speaker is insufficiently entertaining, one easily falls asleep
Recently the use of computer projection with a beamer has become popular. No doubt, this offers wonderful opportunities for spectacular effects. However, most portable beamers are not bright enough for large conference halls, and only very few conference centers have the necessary high-quality beamers installed. Also, the usual presentation software offers so many inviting opportunities, that speakers often use ineffective color combinations and disturbing background patterns, see also Figure 5.
Actually, the old fashioned overhead slides are not so bad at all
Figure 5 Be careful with colors and backgrounds on overhead sheets, slides and posters.
Your presentation will be most effective if you use the same everyday language in which you explain things to a fellow student in the lab. There is absolutely no need to use a more formal language. In fact, formal language is not desirable at all as it is more difficult to understand for the audience. Do not try to impress the audience with fancy words, formal constructions, subject-specific jargon, or unnecessary abbreviations. Think about oral presentations in terms of communication and do not see it as the performance of a literary play. The audience will be grateful if you are easy to follow.
Now comes the moment of truth: Does everything you prepared fit within the available time? There is only one way to find out: Take your stopwatch and go. This is usually a frustrating experience. First, you may note that the sentences simply do not come. My solution is to sit down and write the first part out in clear, short sentences. Second, you will probably find that you have too much material. Hence, you have to cut down and I do hope that you will not take out too much of the General Introduction. With the attention curves of Figures 1 and 2 in mind, it is probably the best to skip a few less important items in the middle of your talk. You should never compromize on the Introduction and the Conclusions!
Carefully timing your presentation is extremely important. Going overtime is an offense to the audience and to the speakers following you, particularly if there are parallel sessions. Nothing is more embarrassing than that the chairman has to stop you before you have been able to present your conclusions!
Only very few of us have been born as a talented speaker. Almost everyone will be nervous before a presentation. For beginners, nervousness may easily lead to lack of confidence, caused by feelings of being inexperienced.
First time speakers often interpret nervousness as a sign that they are apparently incapable of delivering a good presentation. This is not true. All the symptoms that accompany nervousness, such as frequent swallowing, trembling, transpiration, etc. are signs that your body is getting ready for something important. Athletes, stage performers, musicians, and experienced speakers have learned to recognize these symptoms and to appreciate them. They start to worry when these symptoms stay away!
Experience is something that will come in time, by practicing and by analyzing your presentations and those by others. No one in the audience will blame you for being a beginner. However, if you take care to avoid a number of typical mistakes that beginners (and even experienced speakers) make, you will make a very good start with your career as a presenter. If you know and understand the basic principles and you know how to apply these, you are likely to give a talk that is significantly better than the average presentation at international meetings. Hence, lack of experience is not important provided you prepare your presentation well and you do your best to avoid the obvious mistakes listed in this brochure.
Finally, the ten steps we discussed all go back to two basic principles: First what is the message I want to convey, and second, how does the audience understand this message best. Awareness of how audiences listen and memorize is the key behind a presentation that will be appreciated by many.
Back to: How To Give Successful Oral And Poster Presentations